Grease and Oil

Why Automated Lubrication?

Forget “More Is Better”—Precision Is What Matters

Manual lubrication often leads to over-greasing or under-lubricating—both of which damage your equipment over time. Overfilling bearings can force out seals and invite contaminants like dirt and water. Waiting too long? That leaves metal-on-metal contact with no protection.

Automated lubrication solves both problems.

With a precisely timed and dosed application, your machinery stays protected without waste, guesswork, or downtime.

As a global partner of Dropsa, we offer a wide range of pumps, metering systems, filters, and monitoring solutions to meet your specific needs.

Single-Line Injectors

Used in many applications, total loss oil and fluid grease lubrication involves creating a thin oil-film between moving parts which is renewed at regular intervals by an automated lubrication system.

Single line injectors, DL32 or DL33 injectors are ideal for precise machinery lubrication in single-line automatic systems. Designed to optimize lubricant delivery, they help reduce overall consumption and maintenance costs while ensuring consistent and reliable performance.

Series Progressive

The Progressive Divider distributes the flow of a pump into separate 'progressive outlets' by the use of a progressive spool arrangement. Positive lubrication feedback for all of the points can be achieved by monitoring one outlet with a cycle sensor.

The modular concept allows for the quick replacement of an element without interrupting the work cycle.

This solution is suitable for small, medium and large sized machines that require a total control of plant operations

SMX and nPR+ dividers are used on both oil and grease systems, on critical equipment that requires lubrication monitoring.

We primarily utilize Dropsa's Bravo Pump to supply grease or oil for divider valves, and we use the Ultrasensor 2 for monitoring to keep your operations moving smoothly.

Dual-Line

The Dual Line Modular design pioneered by DropsA allows easy configuration and expansion of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work.

This type of grease or oil lubrication system is suitable for industry with large machines and many lubrication points: iron and steel industry, cement plants, platforms, large cranes and cargo handling equipment.

We have used Dropsa's Barrel pumps, and Mini-sumo II pumps in these applications.

Single and Dual Zone Control Panels

Built and designed in house, our single and dual zone control panels allow for multiple systems to be run from a single bulk pump. Each station controls it's own lubrication system that can be monitored and run remotely, while using a common pump.

This also increases the capacity of the system, for applications that require a bit more grease or oil.

We have used Dropsa's Barrel pumps, and Mini-sumo II pumps in these applications.